Connection Schemes

The Service Apparatus Connection Scheme (SACS) allows accredited electrical contractors to install kWh meters and terminate consumer mains.

The Service Apparatus Connection Scheme (SACS) is currently under review. During this time our application forms are unavailable. We apologise for any inconvenience. Queries can be made on (08) 9326 4833.

Service Apparatus Connection Scheme

The Service Apparatus Connection Scheme (SACS) allows accredited electrical contractors to install kWh meters and terminate consumer mains into energised Western Power pillars. After testing and recording the test results on the SACS test form, installations must be left de-energised and tagged out of service.

The scheme is limited to the connection of single direct wired metering installations not exceeding 100 amperes, and includes distributed master metering.

SACS general information for electrical contractors
SACS FAQ
SACS test form
Service Connection test form
Service connection testing form (New, to be used once trained)
Service connection testing work instruction (New, to be used once trained)

Contractor Connection Scheme

Contractor Connect Scheme (CCS) permits allow contractors to install, test and energise new electrical installations. Following satisfactory testing and checking of the work, the installation may be left energised.

Two levels of accreditation (full and restricted) is available to eligible electrical contractors.

Contractor Connect Scheme, contractor and worker handbook