Large multi-residential connection
Who is this for?
For people wanting a new electricity supply for a multi-residential development with a maximum demand of 250A/180kVA or more.
How long will it take?
3 months to provide you with a technical assessment
7-9 months to provide you with a design and quote, depending on the complexity of your project
3 months to construct, upon payment of quote and confirmation your site is ready
How much will it cost?
We'll provide a quote after we complete the scoping and design of your project.
Application fee
Application fee (plus 0.59% credit card surcharge) | $497.42 |
Design fee
Project complexity | Fee |
---|---|
Standard | $1,320 |
Detailed | $3,300 |
Complex | $6,600 |
* While the design fee is GST inclusive, the GST exclusive amount will be deducted from the access offer if proceeding, i.e. GST is not refunded
Other fees
Description | Fee |
---|---|
Construction costs | We will provide a quote |
Cancellation fee | $550 |
The cost of an electricity supply is dependent on how much power you require. In most cases, the cost will be based on what we call the Distribution Low Voltage Connection Scheme.
Depending on your requirements your new point of connection will be serviced by either a pillar, a standalone kiosk or direct into the transformer kiosk.
There are some physical clearances that are required between the electricity network and your equipment.
Substation site
- A substation will usually be required and adequate land for a substation must be included on your application. We recommend consulting the Western Power Distribution Substation Manual for assistance in making sure your substation site is compliant.
- If you are unsure about where a substation site can go please submit a feasibility study and one of our consultant engineers will help you find a solution.
- When making decisions about a substation site, please read the Western Power Distribution Substation Manual.
- If you would like to apply for a non-compliant site please submit a feasibility study and one of our consultant engineers will let you know if it can be used.
- Sometimes we have to change substation specifications or location, if this is the case we will let you know. If your supply will be greater than 100A your electrical contractor will provide the appropriate sized current transformers.
- If your property will have multiple points of supply compliance information from the West Australian Electrical Requirements. In some cases non-compliant points of supply might still be viable - if you would like to pursue this, consider a feasibility study.
What to include with your application
A CAD site plan
Your CAD plan helps us better understand your work site and location of assets. We extract data from your plan to assist us with your design.
Site plan for a large multi-residential connection
For a pillar site plan to be accepted, it must clearly show:
- the proposed pillar location in a visible colour on the site plan.
- the street name on which the property borders.
- the full address of the property.
- the nearest intersection (for rural properties it helps to locate the site)
In order to provide a fast, accurate quote and advice on your new connection arrangement we require a comprehensive site plan with details of your current and/or proposed site layout. This includes but is not limited to the following information being clearly marked on your plan:
- boundary or retaining walls at the side and front of the property - including depth of wall
- location of items such as letterboxes, garden beds, trees/stumps, driveways, crossovers
- detail or grades of any major inclines or slopes near the front boundary
- utility locations for water meters/pipes, gas pipes, sewer mains/connections and access points
- proposed location of new pillar/s
Pillar exclusion zone
The pillar needs to have an exclusion zone of 50cm from its centre. Inside or under the exclusion zone there must not be any:
- water pipes, water storage facilities or water meters
- gas pipes or meters
- telecommunication cables
- sewage, waste water, or storm water pipes
- reticulation pipes or cables
- tree roots and other vegetation
- concrete, asphalt, limestone or bedrock
Find out what underground assets may be in the vicinity by submitting a Dial Before You Dig application.
Site photos
Help us understand your current connection arrangements and more easily identify potential site specific issues. Photos will need to include:
- The extent of the worksite
- Any obstructions in the area
Site photos for a large multi-residential connection
Site photos help us understand your current connection arrangements and more easily identify potential site specific issues. If you're able to supply us with a close up and wide photos it will potentially reduce application times as we won't be required to visit the site.
Neighbours authority
If your project will impact your neighbour’s property by having new assets installed or relocated on or in front of their property, you’ll need their authorisation.
Single line diagram
A single line diagram provides us with the technical information to design a connection to meet your requirements.
Statement of compliance to AS61000.3.6
Your accredited electrical contractor or consultant must submit a statement verifying that the installation complies with AS/NZS 61000.3.11, SA-SNZ TR IEC 61000.3.14 and Western Power’s Technical Rules.
Disturbing loads
The information allows us to check the impact of your loads on the network. You must comply with Power Quality limits as per AS/NZS 61000.3.11, SA-SNZ TR IEC 61000.3.14 and Western Power Technical Rules.
Load breakdown
Your load breakdown allows us to assess the impact your project will have on the network. It also allows us to apply the appropriate charging policy.
Permission from your strata company (if applicable)
Your load breakdown allows us to assess the impact your project will have on the network. It also allows us to apply the appropriate charging policy.
Western Power substation compliance checklist
Please complete Part A of this checklist and submit as part of your application to demonstrate compliance to Western Power’s substation design requirements.
Ready for a large multi-residential connection?
Once you’ve gotten the above, you are ready to apply. Estimated time to complete: 10 minutes
FAQs
Strata schemes typically have a single connection point to the Western Power network that determines the total allocation of available electricity supply and generation capacity to be shared by all strata lots.
This connection point has a fixed capacity, so it's important for strata lot owners and prospective purchasers to be aware of the arrangements and obligations relating to the connection, as it may restrict their ability to install equipment such as home EV charging stations, rooftop solar panels and batteries.
Before applying to connect this type of equipment, strata lot owners should first seek permission from their strata company to use an allocation of the total network capacity allocated to the strata scheme.
Failing to do this may prevent other strata lot owners from connecting their own equipment, or require the strata company to upgrade the connection to the Western Power network to accommodate the needs of all strata lot owners.
It's important to remember that the strata company is ultimately responsible for the management of the common connection to the Western Power network and the common electrical system within the strata scheme. Effective management of this shared resource will allow the benefits of renewable energy solutions to be shared by the all strata lot owners.
More information about strata titling principles can be found in Landgate's Guide to strata titles.
See also: How do I apply for solar power in a lifestyle village, large strata or other multi-residential site?
Western Power is regulated by the state government in terms of how it can earn revenue. Our revenue (through tariffs) is determined by the size of our Regulated Asset Base (RAB).
When streetlights are added to the RAB they have an economic life of 20 years. If a streetlight is replaced or upgraded to LED lighting when it is younger than 20 years old, there’s still some value in there that we haven’t recovered back yet.
Sometimes your circumstances change and you may need to cancel or change the information within your application after you have submitted it to us.
If you wish to change the scope of work in your application we will first review the change and then either:
- continue the project with the variation and invoice you for any additional materials, design work and remobilisation costs incurred. We will typically only take this approach when the change is very minor.
or
- if the change is significant we will cancel your project. You will need to submit a new application with your new requirements.
For cancelled applications we will invoice you for the costs incurred up to the point of cancellation (time and materials). If construction work has already commenced we will refund the difference from your access offer less any costs incurred.