Skip to content

Online Services

Electric vehicle to grid (V2G) system

You can apply to connect your electric vehicle to the grid.

Standard electricity supply for a single house

A new electricity supply to a house, or conversion of an existing overhead supply to underground.

Standard electricity supply for a multi-residential development

A new electricity supply for a multi-residential development with a maximum demand of 250A/180kVA or less

Non-standard electricity supply for a multi-residential development

A new electricity supply for a multi-residential development with a maximum demand greater than 250A/180kVA.

Small commercial electricity supply

A new electricity supply for a small commercial premise with a maximum demand of 250A/180kVA.

Medium commercial electricity supply

A new electricity supply with a maximum demand greater than 250A/180kVA but no greater than 1300A/1000kVA.

Large commercial electricity supply

You want an electricity supply with a maximum demand greater than 1300A/1000kVA.

Inverter system with capacity to 10kVA per phase

You're installing an electricity generating system (such as solar panels) that will feed the Western Power network through inverters.

Inverter system greater than 30kVA and no more than 150kVA

You want to connect an embedded generation system (such as solar panels) greater than 30kVA and no more than 150kVA

Install a single or three phase temporary overhead supply

Install a single or three phase temporary overhead standard supply in an area which is only serviced by overhead supply

Install a temporary supply with above standard power requirements

Install a temporary supply with above standard power requirements.

Non-inverter energy system

Use this form if you're installing an electricity generating system (such as synchronous generators) that will connect to the grid.

Transmission loads and large generators

For all transmission load connections and generator connections in excess of 150 kVA.

Temporary overhead supply

Install a single or three phase temporary overhead standard supply in an area which is only serviced by overhead supply.

Meter installation

Install 1, or multiple, direct meters at a premise that has an existing standard electricity supply.

Inverter system greater than 150kVA and less than 1MVA

You want to connect an embedded generation system (such as solar panels) greater than 150kVA and less than 1MVA.